The Alcoengine Pot Still - Manufactured by KegLand
The whole system is designed to save, time, money and parts, and fit in one box for easier storage and cheaper shipping.
A pure pot still is used when you want the flavour of the wash to come through. For instance, if you ferment fruit or grains, it will allow some of that flavour to enter your distillate. If you use a reflux still, you would just end up with pure, unflavoured vodka. Inject some flavour into your drinks with the Alcoengine Distilling Pot Still!
Fast – 4.5L/hr with alcohol or 2.8L/hr with water
With an all copper construction for smoothness of taste it comes with a digital thermometer and is simple to use.
Just switch it on and collect your alcohol – it couldn’t be simpler than that!
Note: With Robobrew units you will need to purchase the #03483 stainless lid with 47mm hole. This is sold separately and is not included with the Robobrew unit. The stock glass lid that comes with the Robobrew unit will not be suitable.
No more stuffing around with water flow speed!
Some stills are hard to opperate and require fine tuning of the water flow in the condenser. This Alcoengine Design on the other hand just requires a minimum water flow rate and thats it. So the as long as you have enough coolent it doesnt matter how fast your coolent flows through the still. This makes the still far easier to opperate than many other brands.
Easiest Still to Use - That's our guarantee
This bulletproof design is so easy to use that we are giving you a guarantee that you will get great spirit in no time flat. All you need to do is make sure you have adequate water/coolent flowing through the head and just about eventhing else will look after itself.
Compatible with Many Boilers
This still design is compatible with many boiler types. One option is just get a pot and drill a 47mm hole in the lid and this still will fit no worries. The still also fits many standard boilers such as the standard Turbo Boilers, Robobrew, and we have been told by our customers that it also works with the Grainfather . This still can also fit the top of stainless steel kegs too. So you can easily make your own keg boiler. You can use a 2inch tri-clover clamp (not included) and then use the clamp to attach this still to the top of a 50L keg. So you will not find a more compatible still design that fits a wide range of boiler types. This can do it all.
Unlike stainless steel stills and stills that are only copper plated, this still is made from solid copper. When your hot spirit comes in contact with copper the copper acts like a catalytic converter and drives sulfur out of the spirit. This process means you get less "off-flavours" and you simply get better quality spirit. Copper is an expensive metal now and it definitely increases the cost of the still manufacture but we can say for sure that there is a very good reason why it's still the preferred material by many serious distillers simply because the results are superior. Dont listen to other people tell you that stainless is the best. There is no substitute for copper and a still like this will last you a lifetime.
Simple Assembly andSetup
This still is mostly assembled but you still have to connect your garden hose and coolant supply. You can just use your garden hose but it's a bit of a waste of tap water so we recommend that you get a tank at least 500liters in size then use a powerful recirculation pump to drive the still. We would recommend the Ozito 350watt pump that you can get from bunnings and you can purchase this separately yourself. We wouldnt recommend a pump too small as you need a reasonably powerful pump to push the water through the condencer as there is a lot of flow restriction in the condenser head. When you get the still you just need some teflon tape and just attach the fittings as show in the photos above in this add. Please make sure you connect all the fittings and check for leaks before you start distilling. There is nothing worse that trying to attach a fitting once the still has heated up.
This item can be posted anywhere in Australia. we highly recommend using a business address as if you miss the delivery it will go to a consolidation hub and you might have to drive a sigificant distance to pick it up. As a result we find that using a business address is much less likely to cause issues with delivery.
Please also note that all orders are processed within one to two business days. Your order will then be sent for packing and arrive within two to six business days, depending on your location within Australia. You will receive tracking details within 24 hours after it has been scanned at the shipping depo.
We are committed to providing exceptional customer service and quality products. Backed by AMCO/KegLand Service Products we stand by and guarantee Quality gear supplied by people who know and use the gear Supplying great value and exceptional quality.
Many products approved to Australian, European, American standards with CE, UL, SAA and other certification.
For retail Buyer: Please kindly to buy from nearby vendor, Please click the Google Map on our Website Homepage to find the nearby distributor.
Terms and Conditions:
For Bulk order: Please kindly contact us by [email protected]. Payment terms based on FOB China Port, 20% advance T/T with order, 80% balance T/T before shipment. In order to protect the goods we suggest to purchase the goods based on FCL shipment, We do not undertake to guarantee the damage or shortage goods shipped by LCL for we can not control the loading and unloading.